Contact Us

TEL: +86-510-86382999
FAX: +86-510-86382328
MOBILE: +8615251585433
ADD: Qianwei Road 6, B Area Industrial, Zhutangtown, Wuxi Jiangsu, China

Home > News > Content
What About Sand Of Harmonica?
Jun 12, 2018

The harmonica should be used on its own, and it is best for others not to use, so as to avoid adverse consequences due to unsanitary behavior. After each use, the water in the harmonica should be shot, and a napkin and a hole can be used for the shoot. The napkin has good water absorption and is also relatively clean. Shoot out after a period of use, there will always be some dirt inside, you can open the harmonica, rub with alcohol, cotton, but you must pay attention to sprinkle damage to the reed.

Mute sound is nothing when playing. There are many reasons for mute. For example, a harmonica reed is caught by a foreign object, which causes the reed to not vibrate. Then, the harmonica can be disassembled (and sometimes disassembled) so that the debris can be eliminated. Another reason is that the blower has too much saliva, causing the blowhole to become blocked. The reed is stuck to the saliva and does not vibrate normally. The solution is to move the harmonica hole downwards and forcefully take the water out of the harmonica. When a beat is made, a napkin or handkerchief can be placed on the palm of the other hand, and then beat on it. Can be solved.


Most of the sand sounds are caused by the user accidentally dropping the harmonica or flushing it with water, causing the reed to displace or deform. When the player blows, the edge of the reed and the base of the fixed reed are rubbed to generate sand sound. In this case, the harmonica can be completely disassembled, and the reeds' reeds can be aligned or leveled so that the reeds do not rub against the edges of the pedestals. Sand sounds are also eliminated.


After the harmonica is used for a period of time, some sounds will change. The repair method is to first disassemble the harmonica and use a trowel to repair the reed. When the reed sound is low, use a file to remove the head of the reed. The basic pronunciation is high and the root of the reed is removed. . Note that no matter how high or low, don't make too much, so as not to affect the overall tone.